Main Features
1. The fan and heater cab are optional;
2. 955mm narrow tread model can better meet the operational requirements;
3. U.S. ACTUANT combination instruments are optional;
4. The transmission with gear combinations of 8+8, 16+8, and 12+12 has a variety of gear selections, and a reasonable velocity distribution;
5. Chassis uses the four-planetary gear differential, and the power is upgraded to 60 hp;
6. EC, EPA and GOST certification models are available.
Technical parameters
| Drive type | 4*2 | Overall dimension(L * W * H) | 4030*1650*(2150/2520) |
|---|---|---|---|
| Wheelbase (mm) | 2016 | Track(front/rear) | 1150-1450/1200-1500 |
| Track(front/rear) regulating method | Step/stepless | Min.Ground clearance(mm) | 400 |
| Min.operating weight (with cab)(kg) | 2300 | Min.operating weight (without cab)(kg) | 2120 |
| Counterweight (max)(front/rear) | 144/360 | Gears(forward/reverse/creeper) | 8+4/8+8/12+12/16+8 |
| Theoretical speed of each gear(forward/reverse) | 2.65-37.78/2.33-30.49;2.46-32.73/2.15-28.69;0.43-5.7/0.65-1.97;2.24-29.91/1.97-26.22 | Brand | Lijia, Xinchai, Quanchai |
| Engine type | 4-cylinder | Intake mode | Natural intake |
| Number of cylinders | 4 | Bore | 105 |
| Stroke | 118 | Displacement(L) | 4.052 |
| Engine rated power kW@rpm | 44 | Rated speed | 2400 |
| Type of air cleaner | Dry or wet type | Type of cooling system | Forced water-cooled |
| Max. Torque@ revolving speed (rpm) | 235@1600~1800 | Specific fuel consumption rate at rated conditions (g/kW.h) | ≤248 |
| Fuel tank capacity (L) | 38 | Type of steering system | Hydraulic/mechanical |
| Type of steering gear | Cycloid orbitrol steering gear | Type of braking system | Disc type |
| Clutch type | Single-action/double action | Gearbox type | Two-axis mechanical gearbox |
| Gearbox shift mode | Shift sleeve | Type of central transmission | Spiral bevel gear type |
| Final transmission mode (front/rear) | Planetary gear type | Frame type | Frameless |
| Tire Model (front/rear) | 6.0-16/12.4-28 | Type of hydraulic suspension system | Open-center, semi-separated type |
| Type of linkage | Three point rear linkage | Linkage classes | Class II |
| Lift capacity(610mm point)kN | 11.5 | Regulating mode | Force or position independent control |
| Type of PTO shaft | Rear semi-detached type | The number of PTO shaft splines | 6 splines/8splines |
| Outer diameter of PTO shaft spline | φ35/φ38 | PTO shaft speed | 540/760 or 540/1000 or 760/1000 |
| Hydraulic output flow (L/min) | 23 |
Product Option
1. The three-cylinder or four-cylinder engine is optional;
2. The safety frame, heater (air-conditioned cab) are optional or without safety cage;
3. The second-generation or first-generation hood is optional;
4. The single-acting or double-acting clutch is optional;
5. The three-section pipeline, secondary hydraulic fuel tank, etc., are optional.
6.
